Cleaning your machine, Removing bobbin case, Replacing bobbin case – SINGER 6110 User Manual
Page 39: I i i ||ji> 1,.#cili i i 1 r iji 1 i i t
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I i I
||Ji> 1,.#cili I i 1
1 i i t
CLEANING YOUR MACHINE
CAUTION: Before cleaning your machine, dis
connect power line plug from your socket
With a soft cloth or lint brush, clean all points
indicated by arrows, especially the bobbin
case area and teed. Also, clean exposed parts.
If necessary a mild solution of soap and water
may be used to remove stubborn stains. No
other cleaning liquid or powder should be
Periodically apply a drop of oil only to the
areas indicated after cleaning.
REMOVING BOBBIN CASE
REPLACING BOBBIN CASE
Raise needle, open slide plate, remove
needle plate and lift out bobbin.
Turn bobbin case holder A to back as far
as it wilt go.
Lift out bobbin case B.
Insert bobbin case with a back and forth
motion, so that front of the case is under
the position plate C. Turn holder all the
way forward to lock bobbin case.
Replace needle plate and close slide plate.