When bobbin is full, To wind the bobbin—machine 404 – SINGER 404K User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

• Loosen stop motion screw.

Place

empty

bobbin

on

spindle.

Press

bobbin

winder

down

against hand wheel.

Place

spool

of

thread

on

spool pin.

Thread between tension discs

and through bobbin as shown
in Fig. 11.

Hold end of thread and start

machine. (End of thread will
break off after a few coils have
been wound on bobbin).

When Bobbin is Full

• Stop machine.

Lift

bobbin

winder

away

from hand wheel and remove

bobbin.

• Tighten stop motion screw.

F

ig

.

ij

.

To Wind the Bobbin—Machine 404.

To Wind the Bobbin—Machines 328K and 329K.

"""""""".

F

ig

. ]2.

Loosen stop motion

screw.

Place

bobbin

on

spindle.

Pull

out

bobbin

winder

engaging

slide

as

shown

in

Fig. 12.

Place spool of thread

on

spool

pin

and

thread

machine

as

shown in Fig. 13.

Advertising
This manual is related to the following products: