SINGER 404K User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Threading Oscillating Hook Machines Nos. 66K, 99K and 185K
# Raise take-up lever to its
# Place spool of thread on
# Thread machine as shown in
# Thread needle from left to
Place bobbin in case and draw thread
into slot 1, Fig. 24.
Draw thread between case and tension
spring until it reaches notch 2, Fig. 25.
Pull about 3 inches of thread across
enter notch in slide plate.