To wind the bobbin—machines 185k and 327k – SINGER 404K User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To Wind the Bobbin—Machine 99K (New Style),
Loosen stop motion screw.
Place empty bobbin on winder
spindle.
Turn
bobbin
until
hole
in
right
side
engages
pin
in
spindle.
Press winder down until latch
engages.
Place spool of thread on spool
pin.
I Thread machine as shown in
Fig. 9.
)
Hold end of thread and start
machine.
(End
of
thread
will
break off after a few coils have
been wound on bobbin).
)
When bobbin is full, winder
will stop automatically.
► Remove bobbin and retighten
stop motion screw.
F
ig
. 9.
To Wind the Bobbin—Machines 185K and 327K
•
Loosen
stop
motion
screw.
•
Place empty bobbin on
spindle.
•
Press
bobbin
winder
down
against
hand
wheel.
•
Thread
machine
as
shown in Fig. 10.
•
Hold
thread
end
and
start machine.
•
When bobbin is full,
stop machine.
•
Lift
bobbin
winder
away from hand wheel
and remove bobbin.
•
Tighten
stop
motion
screw.
F
ig
. 10.