Adjusting the edge-stitcher, Sewing lace together with the edge-stitcher – SINGER 404K User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
A COMBINED EDGE-STITCHING, LACE-JOINING
AND PIPING ATTACHMENT.
machine in place of the presser foot, and is an
material. The slots numbered 1 to 5 in Fig. 123
serve as guides for sewing together laces, insertions
Adjusting the Edge-Stitcher.
After attaching the
edge-stitcher to the machine, turn the hand wheel
slowly by hand to see that the needle goes through the centre of the needle
hole. The distance of the line of stitching from the edge of the material in
the slots can be regulated by pushing the lug (A) to the right or left. If it
moves hard, put a drop of oil under the blue spring, then wipe it dry.
Together with the Edge-Stitcher.
It is difficult to sew two lace edges together even after basting, but the
edge-stitcher makes it possible to stitch on the very edge. Place one edge
in slot 1 and the other in slot 4, and adjust lug (A) until both edges are caught