Stitching a wide hem with the edge-stitcher – SINGER 404K User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
under a presser foot, and placing the tape in slot 1 or 4. To make a square
corner, sew until the turning point is reached, then remove the tape from the
attachment and form the corner by hand, replace it in the slot and continue
stitching, as shown in Fig. 127. To space two or more parallel rows, a guide
line such as a crease, chalk or basting thread should be used.
. 127. A
Stitching a Wide Hem with the Edge-Stitcher.
A wide hem on sheets, pillow slips, etc., may be stitched evenly with
the edge-stitcher after the hem has been measured and the edge turned.
. 128. M
Insert the edge in slot 5 as shown in Fig. 128 and adjust to stitch as close to
the edge as desired.