The underbraider – SINGER 404K User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Raise the needle and, in place of the ordinary presser foot, fit the Quilter
Foot, without the movable bar. But if it is desired to apply braid in parallel
rows, the bar may be left on to act as a guide.
54. In the case of Machines 15K, 66K, 99K, 185K and 201K the attachment
has to be secured by means of the thumb screw.
Any braid that will fit the Underbraider tube and be stitched through
the centre may be used in the Underbraider. It is sometimes necessary to
force the Braid under the spring by pulling it, or to lift the spring with the
screwdriver. The braid should be well under the foot before starting to sew.
How to Perforate Braiding Designs.
by pinning it to several
shown in Fig. 110.
follow the design with
You will be able to
of the design in this
pattern is then pinned
to the material to be
braided and torn away