To remove bobbin gase, To replace bobbin gase – SINGER 404K User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Gleaning and Oiling—(continued)
To Glean the Stitch-Forming Mechanism
of Machines 66K, 99K and 185K.
If
the
stitch-forming
mechanism
should
become clogged with lint and interfere with the
perfect
operation
of
the
machine,
remove
the
bobbin case, as described in the following in
structions, and dislodge the lint accumulated in
the machine.
To Remove Bobbin Gase.
SINGER
L
int
B
rush
Raise needle and presser foot.
Draw slide plate to the left.
F
ig
. 54.
To Replace Bobbin Gase.
Replace bobbin
case with its fork
straddling bracket G, Fig. 55.
Twist case to. the left, then gently
press down and back until edge of
sewing
hook
engages
groove
under
rim of bobbin case.
Return
latch
F
to
its
original
position.
• Remove bobbin from case.
•
Lift edge of slide plate and draw
it to the right until it is dis
engaged from spring E, Fig. 53.
• Lift and move latch F, Fig. 54, to
position shown.
• Grasp bobbin case as shown.
• Tilt case to the left to raise the
forked end above bracket G.
• Turn forked end toward you, then
lift out bobbin case.
26