Maytag 8111P375-60 - Manual (Page 6)

o
CLOCK AND OVEN CONTROL
Press this pad
to cancel all
operations
except the
TIMER. The
time of day will
reappear in the
display.
U U U U
Self
Clean
Oven on
Preheat
Lock
ABOUT THE FUNCTION PADS
Function pads are the BAKE, BROIL, SELF-CLEAN,
TIMER, CLOCK, COOK TIME, STOP TIME, and
CANCEL pads. A beep will sound when these pads
are pressed.
No beep will sound when the A or ^ pad is pressed
All function pads except the CANCEL f CD
pad feature an indicator light.
When the BAKE or BROIL pad is L
pressed, the indicator light will
turn on to let you know that the
oven is set for this operation.
Bake
Indicator lights on SELF-CLEAN, TIMER,
CLOCK, COOK TIME and STOP TIME pads will
flash when the pad is pressed. These indicator lights
will stop flashing but will remain lit once the function
starts.
If an indicator light on a function pad is lit and you set
a second operation:
Either the control will not accept the operation or
The indicator light on the first pad will “dim" slightly
and the indicator light on the pad you just pressed
will be “full on.” This lets you know that you have
set the control for two operations.
For example: If you set thé oven
to bake at 350°F and then set a
timing operation, the indicator light
on the BAKE pad will “dim” and
^ke
-'VIM”
the indicator light on the TIMER pad will be “full on.”
The display will show the operation
for the pad with the “full on” indicator
light. Press the funtiion pad wjth the
“dim” indicator light to reoall that
operation.
Timer
■TULL
ON”
A
V
Press or press
and hold these
pads to enter
time, oven
temperature or
to select HI or
LO broil.
HOW TO SET CLOCK
1. Press CLOCK pad.
2. Press or press and hold
A or Y pad until correct
time of day appears in
display.
c!ock| then
A
V
Display will flash when power is supplied to unit.
Press CLOCK pad. To recall time of day when another
function is displayed.
Clock time cannot be changed if oven is set for timed
bake or delayed clean operation. Cancel the operation
before setting the clock.
If timer is in use, press CLOCK pad once to recall the
time of day or twice to reset the time of day.
CLOCK DISPLAY DISABLE FEATURE
If you prefer that the time of day is not displayed:
1. Press and hold both
CLOCK and CANCEL
pads for 3 seconds.
When clock display is
■■ '
Clock and
Cancel
disabled, press CLOCK pad to recall time of day for 4
seconds. Display will then blank.
If a power failure occurs when the clock has been
disabled, the display remains blank and will not flash
when power is restored.
Repeat step 1 to reactivate clock feature.