How to set timer, 12 hour energy saver feafuré, Control lock-out feature – Maytag 8111P375-60 User Manual
Page 7: End of timed cook” beeps, Clock and oven control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLOCK AND OVEN CONTROL
HOW TO SET TIMER
1. Press TIMER pad.
2. Press or press and hold
A or ▼ pad until correct
time appears in display.
The timer feature does not operate the oven.
The timer can be set from 1 minute [0:01] up to 9 hours
and 50 minutes [9:50].
The timer will start automatically. The TIMER indicator on
the TIMER pad will light whenever the timer is in use. One
long beep and “End” will be briefly displayed to signal the
end of the timer operation..
To cancel timer: Press and hold TIMER pad for 3
seconds. Time of day will reappear in the display.
12 HOUR ENERGY SAVER FEAfURÉ
The 12 Hour Energy Saver feature automatically turns off
the oven if it was accidently left on for 12 hours. To
deactivate this feature so the oven will NOT turn off
automatically at the end of 12 hours:
1. Press and hold CLOCK pad
for 3 seconds.
2. Press A Of ^ pad until 8:88
appears in the display.
Current time of day will
reappear in the display after
Repeat steps 1 and 2 to reactivate the 12 Hour Energy
Saver feature. 12:00 will appear in display to indicate the
Energy Saver feature is restored.
CONTROL LOCK-OUT FEATURE
The Control Lock-Out feature prevents the oven from
being turned on.
1. Press and hold both
STOP TIME and
CANCEL pads for 3
2. “OFF” will appear in display
when this feature is activated. Only the clock and
timer functions will operate when Control Lock-Out
feature is activated.
Repeat step 1 to deactivate.
“END OF TIMED COOK” BEEPS
You have a choice of three “end of cooking” reminder
beeps for the Automatic Oven Timer feature.
Option 1: Four beeps then one beep every 30 second:
for the next 5 minutes or until CANCEL pad is
pressed. (Default option.)
Option 2: Four beeps. There are no other beeps.
Option 3: Four beeps then one beep every minute for
the next 12 hours or until CANCEL pad is pressed.
How to select the desired option:
1. Press and hold both
COOK TIME and CLOCK
pads for 3 seconds.
• A single beep will sound.
Display will show current
2. Press A O'" Y pad to
select the option number
you wish. The current time
of day will reappear in the
display after 4 seconds.