ADLINK PXI-2006 - Manual (Page 25)

Installation 15
2 Installation
This chapter describes how to install the DAQ/PXI-20XX. The con-
tents of the package and unpacking information that you should be
aware of are outlined first.
The DAQ/PXI-20XX performs an automatic configuration of the
IRQ, and port address. Users can use software utility, PCI_SCAN
to read the system configuration.
2.1 Contents of Package
In addition to this User's Guide, the package should include the
following items:
X
DAQ/PXI-20XX Multi-function Data Acquisition Card
X ADLINK All-in-one Compact Disc
X Software Installation Guide
If any of these items are missing or damaged, contact the dealer
from whom you purchased the product. Save the shipping materi-
als and carton in case you want to ship or store the product in the
future.
2.2 Unpacking
Your DAQ/PXI-20XX SERIES card contains electro-static sensi-
tive com-ponents that can be easily be damaged by static electric-
ity.
Therefore, the card should be handled on a grounded anti-static
mat. The operator should be wearing an anti-static wristband,
grounded at the same point as the anti-static mat.
Inspect the card module carton for obvious damages. Shipping
and han-dling may cause damage to your module. Be sure there
are no shipping and handling damages on the modules carton
before continuing.
After opening the card module carton, extract the system module
and place it only on a grounded anti-static surface with component
side up.