Memory, Intel® c604 pch overview, 3 intel® c604 pch overview – ADLINK aTCA-6250 User Manual

Page 17

Advertising
background image

17

3.1.2 Memory

The aTCA-6250 is a dual processor system with each Intel® Xeon® processor E5 providing
four memory channels supporting DDR3 800, 1066, 1333, and 1600 MT/s DIMMs. The
maximum memory capacity is 128GB with memory interleaving support. The 400/533/667/800
MHz differential memory clocks are driven by the Intel® Xeon® processor E5 CPU with
length-matching and impedance controlled through all the DIMM slots.

The next generation of Xeon® family CPU is code named Ivy Bridge-EP. Each Ivy Bridge-EP
provides four memory channels supporting DDR3 800, 1066, 1333, 1600 and 1866MT/s
DIMMs. The maximum memory capacity is 128GB with memory interleaving support. The
400/533/667/800/933 MHz differential memory clocks are driven by the Ivy Bridge-EP CPU
with length-matching and impedance controlled through all the DIMM slots.

The DDR3 DIMMs support the I

2

C interface. They are connected together and routed to the

PCH for the management.


Memory configuration changes are only permitted to be performed at the factory.
Failure to comply with the above may result in damage to your board or improper
operation.

3.1.3

Intel® C604 PCH Overview

The Intel® C604 Chipset PCH provides a connection point between various I/O components
and DMI based processors. Functions and capabilities include:

‹

PCI Express Base Specification, Revision 2.0 support for up to eight ports with transfers

up to 5 GT/s.

‹

PCI Local Bus Specification, Revision 2.3 support for 33 MHz PCI operations (supports

up to four Req/Gnt pairs).

‹

ACPI Power Management Logic Support, Revision 4.0a Enhanced DMA controller,

interrupt controller, and timer functions

‹

Integrated

Serial

Attached

SCSI

host controllers at transfer rate up to 3Gb/s on up to four

ports.

‹

Integrated Serial ATA host controller switch independent DMA operation on up to six ports.

‹

USB host interface with two EHCI high-speed USB 2.0 Host controllers and 2 rate

matching hubs provide support for support for up to fourteen USB 2.0 ports

‹

Integrated

10/100/1000

Gigabit Ethernet MAC with System Defense

‹

System Management Bus (SMBus) Specification, version 2.0 with additional support for

I

2

C devices

‹

Intel® High Definition Audio Supports

‹

Intel® Rapid Storage Technology enterprise (Intel® RSTe)

‹

Intel®

Active

Management Technology (Intel® AMT)

‹

Intel®

Virtualization

Technology for Directed I/O (Intel® VT-d)

‹

Intel®

Trusted

Execution

Technology (Intel® TXT)

‹

Low Pin Count (LPC) interface Firmware Hub (FWH) interface

‹

Serial Peripheral Interface (SPI)

‹

Intel® Anti-Theft Technology (Intel® AT)

‹

JTAG Boundary Scan support

Advertising