ADLINK aTCA-6250 - Manual (Page 48)

48
To update other images (BIOS, FRU, etc), just replace the target image and the file name
while typing command.
Item File name
IPMC firmware hpm1fw.img
BIOS hpm1bios.img
Note:
1. The hpm1bios.img always updates the backup BIOS image.
2. Make sure the payload power is off (M1 state) before updating the IPMC firmware
5.3.2 Update over KCS
Step1: Prepare an aTCA-6250 with Linux system. Enter the following command to make
sure the ipmi_si and ipmi_devintf modules are loaded before the IPMItool utility can be
used.
Step2: Put IPMItool and “target image” in the Linux system then enter the following
command: