ADLINK aTCA-6250 - Manual (Page 65)

65
Terminal Type
VT-UTF8 is the preferred terminal type for out-of-band management. The next best
choice is VT100+ and then VT100.
Bits per second
Select the bits per second that you want serial port to use for console redirection.
Data Bits
This option allows to select the data bits you want the serial port to use for console
redirection.
Parity
Set this option to select Parity for console redirection.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning).
The standard setting is 1 stop bit. Communication with slow devices may requires
more than 1 stop bit.
Flow Control
Set this option to select Flow control for console redirection.
VT-UTF8 Combo Key Sup
This option is used for enabling or disabling VT-UTF8 Combo key.
Recorder Mode
This option is used for enabling or disabling Recorder Mode.
Resolution 100x31
This option is used for enabling or disabling resolution 100x31 support.
Legacy OS Redirection
This option is used for configuring the legacy OS text format for proper display if
system boots to legacy OS with console redirection enabled.