ADLINK aTCA-6250 - Manual (Page 86)

86
7.3.3 Linux System Setting
Linux needs to be told to listen for logins on the serial port. This is done by adding the
following line to /etc/inittab.
Add the following line to the init configuration file /etc/inittab.
s1:12345:respawn:/sbin/agetty –L ttyS1 115200 vt100
Now the target aTCA-6250 is ready for SOL connection.
7.4 Establish SOL Connection
Execute the following command from your remote client to establish the SOL Connection
Command:
ipmitool -I lanplus -H <Target IPMC IP > -C < Cipher Suite Id > -U <User Name> -P
<Password> sol activate
Note: Please refer to the following table for the Cipher Suite Id
ID characteristics Cipher Suite
Authentication
Algorithm
Integrity
Algorithm(s)
Confidentiality
Algorithm(s)
0
“straight
password"
00h, 00h, 00h RAKP-none None None
1 S 01h, 00h, 00h None None
2 S, A 01h, 01h, 00h None
3 S, A, E 01h, 01h, 01h AES-CBC-128
4 S, A, E 01h, 01h, 02h xRC4-128
5 S, A, E 01h, 01h, 03h
RAKP-HMAC-
SHA1
HMAC-SHA1-
96
xRC4-40
6 S 02h, 00h, 00h None None
7 S, A 02h, 02h, 00h None
8 S, A, E 02h, 02h, 01h AES-CBC-128
9 S, A, E 02h, 02h, 02h xRC4-128
10 S, A, E 02h, 02h, 03h
HMAC-MD5-
128
xRC4-40
11 S, A 02h, 03h, 00h None
12 S, A, E 02h, 03h, 01h AES-CBC-128
13 S, A, E 02h, 03h, 02h xRC4-128
14 S, A, E 02h, 03h, 03h
RAKP-HMAC-
MD5
MD5-128
xRC4-40
80h-BFh OEM specified OEM specified OEM specified OEM specified OEM specified
C0h-FFh reserved - - - -