Network stack, 10 network stack, Parity – ADLINK aTCA-6250 User Manual
Page 67: Stop bits
Advertising
![background image](/manuals/733522/67/background.png)
67
Parity
Set this option to select Parity for console redirection.
Stop Bits
Stop bits indicate the end of a serial data packet. (A start bit indicates the beginning).
The standard setting is 1 stop bit. Communication with slow devices may requires
more than 1 stop bit.
6.3.10 Network
Stack
You can use this screen to specify options for the Network Stack settings.
The screen is shown as below.
Network Stack
This option is used for enabling or disabling the network stack for onboard Ethernet.
Advertising