ADLINK aTCA-6250 - Manual (Page 59)

59
6.3.3 Runtime Error Logging
You can use this screen to specify options for the runtime error logging settings. Use
the up and down <Arrow> keys to select an item. Use <+> and <-> keys to change
the value of the selected option. The settings are described in the following pages.
The screen is shown as below.
Runtime Error Logging
This option allows user to enable or disable runtime error logging.
Memory Corr. Error Threshold
This option is for setting memory correctable error threshold value.
PCI Error Logging Support
This option is for enabling or disabling PCI error logging.
Poison Support
This option is for enabling or disabling Poison Support. When poisoning is enabled,
CPU doesn’t signal the uncorrectable error via MCERR but may signal CMCI if CMCI
is enabled.
Poison Support in IOH
This option is for enabling or disabling IOH Poison Support. When poison is enabled,
no signaling or logging is done at IIO. Logging and signaling is responsibility of the
Data consumer.