System event log, 1 system event log, Sel components – ADLINK aTCA-6250 User Manual
Page 78: Erase sel, When sel is full, Log efi status codes
Advertising
78
6.5.1
System Event Log
You can use this screen to specify options for the System Event Log settings. Use
the up and down <Arrow> keys to select an item. Use <+> and <-> keys to change
the value of the selected option. The settings are described in the following pages.
The screen is shown as below.
SEL Components
It is designed for enabling or disabling all features of system event logging during
boot.
Erase SEL
It is used for enabling or disabling SEL erasing.
When SEL is Full
It is used for configuring the action if SEL reaches full condition.
Log EFI Status Codes
It is used for disable the logging of EFI status codes or log only error code or only
progress code or both.
Advertising