ADLINK aTCA-6250 - Manual (Page 64)

64
6.3.8 Serial Port Console Redirection
The settings on this setup screen specify how the host computer and the remote
computer (which the user is using) exchange data. Both computers should have the
same or compatible settings, like baud rate, terminal type, and so on.
6.3.9 COM0/COM1/COM2 Console Redirection
This item is used to configure the enabling/disabling of console redirection to each
COM port. For example, COM0 is set to enable console redirection. The below
screen will be needed to set properly for communicating with other computer that is
using terminal software to receive the message from aTCA-6250.