ADLINK aTCA-6250 - Manual (Page 22)

22
3.3.2 VGA Interface
A DB-15 female connector on the front panel provides analog display output.
Front Panel VGA Pin Definition (DB-15)
3.3.3 Ethernet Connection
The aTCA-6250 is equipped with one quad-port Intel® I350 AM4 Gigabit Ethernet
Controller and one dual-port Intel® 82576EB Gigabit Ethernet Controller which provide six
GbE ports in total. In default configuration, four ports from the Intel® I350 AM4 Gigabit
Ethernet Controller are connected to the front panel RJ-45 ports. Two GbE ports from the
Intel® 82576EB Gigabit Ethernet Controller are connected to Zone 2 Base Channels 1 and
2 (BCH1/BCH2).
The aDB-6100-A Fabric riser card is installed on the aTCA-6250 by default and provides
support for different configurations of Fabric Channels 1 and 2. Equipped with an Intel®
82599EB Ethernet controller, the riser card provides two 10GbE links to Fabric Channels 1
and 2 (FCH1/FCH2).
With the aTCA-R6270 RTM installed, the aTCA-6250 supports dual 10GbE SFP+ ports
from the Intel 82599ES Network Interface Controller connected to the PCIe x8 bus of CPU1.
Front Panel GbE Pin Definition (RJ-45)
Pin GbE Signal Names
1 Transmit Data1 +
2 Transmit Data1 -
3 Receive Data2 +
4 Receive Data3 +
5 Receive Data3 -
6 Receive Data2 +
7 Transmit Data4 +
8 Transmit Data4 -
Pin Name Pin Name
1 RED 9 +5v
2 GREEN 10 GND
3 BLUE 11 NC
4 NC 12
DDC_DATA
5 GND 13 HSYNC
6 GND 14 VSYNC
7 GND 15 DDC_CLK
8 GND