5 server mgmt setup screen, Server mgmt setup screen, Bmc support – ADLINK aTCA-6250 User Manual
Page 77: Frb-2 timer, Frb-2 timer timeout, Os watchdog timer, Os wd timer timeout
77
6.5 Server Mgmt Setup Screen
You can use this screen to specify options for the Server Management settings. Use
the up and down <Arrow> keys to select an item. Use <+> and <-> keys to change
the value of the selected option. The settings are described in the following pages.
The screen is shown as below.
BMC Support
It is for enabling or disabling the interface to communicate with BMC.
FRB-2 Timer
It is for enabling or disabling FRB-2 timer (POST timer).
FRB-2 Timer timeout
It can select the value between 3 to 6 min for FRB-2 timer expiration value.
OS Watchdog Timer
If enabled, starts a BIOS timer which can only be shut off by Intel Management
software after the OS loads.
OS WD Timer Timeout
If is for configuring the length of the OS boot watchdog timer. Not available if OS boot
watchdog timer is disabled.