Digi X2 - Manual (Page 111)

1 1 1
C o n f i g u r e D i g i d e v i c e s
When the VPN tunnel has been added to the configuration settings after you
click Apply, the VPN Policy Settings page looks like this:
10 Configure the remote VPN concentrator with the same settings, remembering to
reverse the peer endpoint and remote/local subnet settings.
11 To test the VPN connection, generate traffic from the remote subnet to the HQ
subnet.
For example, from 172.17.1.100, ping 172.16.5.1. The response from the first
few pings will be “Destination Host Unreachable” because 172.17.1.100 does
not know the route to the remote site. After the VPN tunnel is established, the
ping either responds or times out.
12 To manage an active VPN connection, see "Manage VPN connections" on page
189.