Digi X2 - Manual (Page 69)

6 9
C o n f i g u r e D i g i d e v i c e s
Open the web interface
To open the web interface, either enter the Digi device’s URL in a web browser and log on
to the device, if required, or use the Digi Device Discovery utility to locate it and open its
web interface.
By entering the Digi device’s IP address in a web browser
1 In the URL address bar of a web browser, enter the IP address of the device.
2 If security has not been enabled for the Digi device, the Home page of the web
interface is displayed. If security has been enabled for the Digi device, a login
dialog will be displayed. Enter the user name and password for the device. The
default username is root and the default password is dbps. If these defaults do not
work, contact the system administrator who set up the device. Then the Home page
of the web interface is displayed. See "Organization of the web interface" on page
71 for an overview of using the Home page and other linked pages.
Note The idle timeout automatically logs users out of the web interface after 5
minutes of inactivity if password authentication has been enabled for the
device.
By using the Digi Device Discovery utility
Alternatively, use the Digi Device Discovery Utility to locate the Digi device and open its
web interface.
Install Digi Device Discovery utility
The Digi Device Discovery Utility is available on the Software and Documentation CD. If
this utility is not already available on your computer, follow these steps.
1 On the main page Software and Documentation CD, click software - install
optional software.
2 Select Device Discovery Utility and click Install.
3 Follow the prompts of the Setup Wizard to install the Digi Device Discovery Utility
software.