Digi X2 - Manual (Page 121)

1 2 1
C o n f i g u r e D i g i d e v i c e s
Provision a mobile device
Mobile device provisioning is needed to properly configure the Digi device with the
required configuration used to access the mobile network. The device must be provisioned
before you will be able to create a data connection to the mobile network.The device only
needs to be provisioned once. This type of provisioning applies only to Digi devices that
have a CDMA cellular module.
For Digi devices, provisioning is done through the Mobile Device Provisioning Wizard,
which is launched from the Mobile Configuration page.
Launch the Mobile Device Provisioning Wizard
Below the Service Provider selection list is a line of text that states whether or not the
device has already been provisioned or needs to be provisioned. If a device has not yet
been provisioned, the Mobile Configuration page displays a message, as shown below.
Click the Provision Device button to launch the Mobile Device Provisioning Wizard. For
example, here is how the Mobile Settings page looks when a device has not yet been
provisioned.