About user models and user permissions, Password authentication, Enable password authentication – Digi X2 User Manual
Page 161
1 6 1
C o n f i g u r e D i g i d e v i c e s
About user models and user permissions
In Digi devices that have a one-user model:
By default, there is no login prompt.
The default name for user 1 is root. This user is also known as the
administrative user.
User 1 has permissions that enables it to do all commands. Permissions cannot
be altered.
Password authentication
By default, there is no password authentication for Digi Cellular Family devices. That
means if when accessing the Digi Cellular Family device by opening the web interface or
issuing a telnet command, no login prompt is displayed.
Enable password authentication
If desired, enable password authentication for the Cellular Family device.
In the web interface:
1
On the Main menu, click Security.
2
On the Security Configuration page, check the Enable password authentication
check box.
3
Enter the new password in the New Password and Confirm Password edit boxes.
4
Click Apply.
5
A prompt is displayed to immediately log back in to the web interface using the
new values.
From the command line:
To enable the login prompt for a device that uses the one-user model, issue a newpass
command with a password length of one or more characters.