Digi X2 - Manual (Page 200)

M o n i t o r i n g c a p a b i l i t i e s f r o m t h e c o m m a n d l i n e
2 0 0
set alarm
The set alarm command displays current alarm settings, including the conditions which
trigger alarms, and how the alarms are sent, either as an email message, an SNMP trap, or
both. The alarms can be reconfigured as needed.
set buffer and display buffers
These commands can be used to display port-buffering-related information. set buffer
configures buffering parameters on a port and displays the current port buffer
configuration. display buffers displays the contents of a port buffer, or transfers the port-
buffer contents to a server running Trivial File Transfer Protocol (TFTP).
set snmp
Configures SNMP, including SNMP traps, such as authentication failure, cold start, link
up, and login traps, and displays current SNMP settings.
show
Displays current settings in a device.