Digi X2 - Manual (Page 204)

M o n i t o r i n g c a p a b i l i t i e s f r o m t h e c o m m a n d l i n e
2 0 4
display mesh
The display mesh command refreshes the display of Mesh network devices, and displays
specific information about Mesh network devices.
Command syntax is:
display mesh [options...]
options:
refresh {Discover network devices}
address=device address {Specify device to display}
For example, here are two display mesh commands. The first one displays the Mesh
network device list. The second displays information about one of the routers in the list.
#> display mesh
Mesh network device list
PAN ID: 0x007a
Channel: 18
Gateway address: 00:0d:6f:00:00:06:89:37!
Device address Node Parent Manufacturer Profile Label
------------------------ ---- ------ ------------ ------- -----
COORDINATOR
00:0d:6f:00:00:06:89:37! 0000 fffe 101e c105 Coordinator
ROUTERS
00:0d:6f:00:00:06:89:31! 8e3e fffe 101e c105 XBEE-RTR-PWRCTL-R
00:0d:6f:00:00:0c:c9:7a! 93b1 fffe 101e c105 XBEE-RS485
00:13:a2:00:40:0a:09:35! fe0a fffe 101e c105 XBEE-RTR-PWRCTL-L
END NODES
To display device details:
display mesh address=(device address)