Digi X2 - Manual (Page 27)

2 7
I n t r o d u c t i o n
Issue a new/changed password to
a user
Configuration > Security 160
Serial port configuration:
Basic serial port settings Configuration > Serial Ports > Basic Serial Settings 142
Advanced serial port settings Configuration > Serial Ports > Advanced Serial Settings 143
Port profiles: associate a serial
port with a set of preconfigured
port settings for a specific use
Configuration > Serial Ports > Port Profile Settings 137
RCI over serial mode Configuration > Serial Ports > Advanced Serial Settings 143
RTS Toggle Configuration > Serial Ports > Advanced Serial Settings 143
TCP serial connections Configuration > Serial Ports > port > Port Profile Settings >
TCP Sockets port profile 139
UDP serial characteristics Configuration > Serial Ports > port > Port Profile Settings >
UDP Sockets port profile 140
Simple Network Management Protocol (SNMP):
Configure SNMP through the
web interface
Configuration > System > Simple Network Management
Protocol (SNMP) Settings 153
Enable/disable SNMP service Configuration > Network > Network Services 82
Enable/disable SNMP alarm
traps
Configuration > Alarms > alarm > Send SNMP trap to
following destination when alarm occurs 151, 152
Feature/task Path to feature in the web interface See page