Digi X2 - Manual (Page 63)

6 3
Configure Digi devices
C H A P T E R 2
This chapter describes how to configure a Digi device. It covers these topics:
"Default IP address" on page 64, identifying the predefined static IP address for
your Digi device.
"Alternate methods for assigning an IP address" on page 64
"Configuration through the web interface" on page 68.
"Configuration through the command line" on page 166.
"Configuration through Simple Network Management Protocol (SNMP)" on
page 169.
"Batch capabilities for configuring multiple devices" on page 174.
The primary focus of this chapter is on configuring Digi devices through the web
interface. To use the Digi Device Setup Wizard for initial configuration, see the online
help for the Wizard. For instructions on launching the wizard, see "Configure an IP
address using the Digi Device Setup Wizard" on page 64.