Hardware features, Network interface features, Configurable network services – Digi X2 User Manual
Page 29
2 9
I n t r o d u c t i o n
Hardware features
A summary of hardware features, including power-supply information, is in "Hardware
Network interface features
A detailed list of network interface features is in Chapter 5, "Specifications and
certifications". See also the data sheet for your Digi product.
Configurable network services
Access to network services can be enabled and disabled. This means that a device’s use of
network services can be restricted to those strictly needed by the device. To improve
device security, non-secure services, such as Telnet, can be disabled.
Network services that can be enabled or disabled include:
Advanced Digi Discovery Protocol (ADDP): can enable or disable ADDP, but
cannot change its network port number.
RealPort
Encrypted RealPort
HTTP/HTTPS
Line Printer Daemon (LPD)
Remote Login (rlogin)
Remote Shell (rsh)
Simple Network Management Protocol (SNMP)
Telnet
In the web interface, access to network services is enabled and disabled on the Network
Services page of Network Configuration. For more information, see "Network services
settings" on page 82. In the command-line interface, network services are enabled and
disabled through the set service command. See the Digi Connect Family Command
Reference for the set service command description.