EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 115)

Creating and Starting a Test Case
SONET/SDH Application 101
Typical Test Cases
5f. For STS-1, STS-3c,
STS-12c, STS-48c,
STS-192c, AU-3,
AU-4, AU-4-4c,
AU-4-16c,
AU-4-64c
mapping, select
the timeslot from
the Grid tab.
However, for
STS-1, STS-3c,
STS-12c, AU-3,
AU-4, and AU-4-4c
in OC-768/STM-256
mapping level, first
select the timeslot
group from the
Grid tab.
To return to the
timeslot group
selection, press
the Full Grid tab,
then select a new group.
5g. For GFP, the UPI and the EXI parameters are
preset and not configurable. GFP is available in
Coupled test mode only. Refer to GFP Frame TX
on page 432 for more information.