EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 42)

Introducing and Using the Graphical User Interface
28 IQS-8100 Series Transport Blazer
Starting the IQS-8100 Series Transport Blazer Application
Note: Refer to the Ethernet and Fibre Channel Application user guide for more
information on Packet Analyzer.
The exit button ( X ) closes the Network Analyzer, SONET/SDH
Analyzer, and/or Packet Analyzer applications. If a test is created, one
of the following confirmation messages is displayed, based on the
standalone feature status (enabled or not). Refer to the IQS-600 user
guide for more information on the standalone feature.
³
The following message is displayed when exiting the GUI while a
test is created and standalone is disabled.
Are you sure you want to exit the Network Anlyzer, SONET/SDH
Analyzer, and Packet Analyzer? Any unsaved information will be
lost.
³
The following message is displayed when exiting the GUI while a
test is created and standalone is enabled.
Exiting the application will maintain the module alive as the
Standalone mode is enabled. Are you sure you want to exit?