EXFO IQS-8100 Series Transport Blazer for IQS-600 - Manual (Page 484)

Next-Generation Tabs
470 IQS-8100 Series Transport Blazer
LCAS - Source
Group
³
Provisioned Member: Indicates the members that can be used for
payload transmission. For example VT1.5v-4v, 4v indicates that 4
members are available for payload transmission.
³
Active Member: Indicates the members that are used for payload
transmission (not in error). For example VT1.5v-3v indicates that 3
members are used for payload transmission.
RS-Ack (Re-Sequence Acknowledge)
³
Status: Indicates the status of the re-sequence acknowledge. Possible
statuses are Received and Pending.
³
Timeout Count: Indicates the RS-Ack timeout count.
Alarm Analysis
LCAS: The LCAS alarm is declared when any related LCAS alarm or error is
active.
Overwrite Control
Disable All Overwrite(s): Allows disabling all overwrite settings from the
SQ/CTRL Control and MST/RS-Ack Control tabs. This button is not
available when there is no overwrite value applied.