FeiYu Tech Panda Autopilot - Manual (Page 18)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 17
deactivation is that the aircraft will continue flying the set route even without Data Radio
communication. This way, it can complete its flight mission fully autonomously. Of
course it would make sense to have the mission end at the base station so you won‘t lose
your plane!
RTH DeActivated：choose ― Para Settings‖ —＞ ― Flight Para‖, click ― RTH Deactivated‖,
when the button turn green, meaning you have set successfully. Shown as above:
OPTION 1: GROUND STATION DIAGRAMME
OPTION 1: Ground Station Requirements:
a) You will need at least a 6 channels Receiver
b) You will also need at least two, 3-position switches on your Radio Transmitter.
c) If you wish to use a 5 volt Receiver battery to power the ground station system, please
disconnect the 5 volt power coming from the USB Interface cable (picture below):
RC Remote Receiver
AIL
USB—Serial TTL
THR
CH5
ELE
CH6
RUD
Data Radio
Receiver battery