Fy-gcs module introduction – FeiYu Tech Panda Autopilot User Manual
Page 27
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 26
Operating System: Windows XP system, Vista, Win7system, etc
Monitor resolution: 1024x768 or above.
Port:
Support 9-pin serial port or USB Serial converter
(Baud rate19200 or more)
Other Peripherals: Keyboard, Mouse.
The installation for the GCS software and the USB-TTL Serial cable
First you have to download the GCS software and
USB-TLL serial drive
on our official websit
.
After that, you can set up the software. You had better set the value as default, or select
suitable installation path, but the path should not be on desktop or too deep, and it shouldn‘t
include Chinese, space, or other strange characters.
Before using the GCS, you have to install dotnetframework3.5 (It must be the Version 3.5,
not other versions!!) you can refer this link for it.
Also have to set up this Google Earth plug-in, software download reference address:
You had better uninstall the Google Earth soft which has been installed before.
FY-GCS MODULE INTRODUCTION
Open the GCS, you can see the following interface.
Step One: install the USB-TTL serial drive
1) Double-click the serial drive, installed by default.