FeiYu Tech Panda Autopilot - Manual (Page 44)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 43
2. If the the elevator does not follow the correct movement, please set ―ELE REV‖ in the
―REV rudder settings‖ box. You should
now see the correct servo movement after
‗checking‘ the box.
Rudder Check:
1. Holding the plane in your hands ―yaw the plane‖ from left to right. The rudder should
give a signal to counter the yaw motion as shown bleow:
2. If the rudder does not follow the correct movement, please set ―RUD REV‖ in the ―REV
rudder settings‖ box. You should now see the correct servo movement after ‗checking‘
the box.
Rotate right
Rudder moves to the left
Rotate left
Rudder moves to the right
Pander IN AUTO BALANCE MODE
Nose UP
Elevator moves down
Elevator moves up
Nose DOWN
Pander IN AUTO BALANCE MODE