FeiYu Tech Panda Autopilot - Manual (Page 24)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 23
OSD & FY-602 DATA RADIO INSTALLATION (ON-BOARD AIRCRAFT),
use the Option 1 setting method.
*
Thr & 5 Volt – Throttle signal input and 5 volt power supply from ESC. Use the ESC
BEC input only if it can output stable 3A current.
β
5V BEC supply – We highly recommend using an external switching BEC instead of
powering via the ESC BEC. Disconnect the power supply (red wire)
from the ESC if you use an external BEC.
Autopilot Back-end Interface
GPS
FY602
Camera
Power
Main Battery
Pack
ESC
Motor
Current
Sensor
5V BEC supply β
Thr & 5V *
ELE AIL RUD
Video transmitter
Autopilot Front Interface