FeiYu Tech Panda Autopilot - Manual (Page 43)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 42
Layout Options
Normal layout plane Normal& No AIL/Turn via AIL
Delta-winged plane with rudder Elevons/ Turn via AIL
Delta-winged plane without rudder Normal& No AIL/Turn via AIL& RUD
Plane without aileron but with elevator and rudder Elevons/ Turn via AIL& RUD
PRE-FLIGHT CHECK:
3. The following procedure explains how to correct servo control direction upon Panda
activation.
4. Control direction Check.
Switch to the "Auto Balance Mode" mode, check the control direction as explained below.
Aileron Check
1. Holding the plane in your hands roll the plane to the right. The ailerons should give a
signal to counter this roll direction as shown below.
2. If the ailerons move correctly, then you have the correct ―AIL REV‖ setting.
3. If the ailerons do not follow the correct
movement, please set ―AIL REV‖ in the
―REV rudder settings‖ box. You should
now see the correct servo movement after
‗checking‘ reverse.
Elevator check:
1. Holding the plane in your hands tilt the nose up and down. The elevator should give a
signal to counter this tilting motion as shown below:
Left wing aileron automatically
moves upwards.
Roll right
Right wing aileron automatically
moves downwards
Right wing automatically moves upwards
Roll left
Left wing aileron automatically
moves downwards
Pander IN AUTO BALANCE MODE