FeiYu Tech Panda Autopilot - Manual (Page 36)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 35
Click the ―OK‖ button to connect, then click to switch to instrumentation
interface. The changing information is shown on this interface.
2) Air route setting
a) Altitude Initialization
To get accurate altitude recording on the GCS, you need to initialize the altitude record. It is
important to enable 3D flight rendering on the GCS, otherwise it may result in rendering a flight
path outside the map layer.
The GCS can initialize altitude automatically when obtains GPS signal. But if no GPS
position or there is error when auto initialization, you should initialize by yourself.
Click
，
The button background will turn green,
Click ―tools‖ in the
menu bar and choose ―Altitude Initialization‖, then press the ―Ctrl‖ key,
Move the cursor over
the take-off point position in the map and click the left button to confirm. (shown as below)