Servo control direction and debugging – FeiYu Tech Panda Autopilot User Manual
Page 42
Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 41
8. The FY602 data radio has red and green status lights.
9. FY-602 Red light – Data Radio is ―transmitting‖.
10. FY-602 Green light – Data Radio is ―receiving‖.
11. If you find that transmission of the data radio causes the rudder to ―twitch‖ from interference,
please move the Data Radio transmitter away from the rudder or other effected servos.
Servo Control Direction and Debugging
ATTENTION! It is recommended that you remove your prop or disable your motor while
performing these setup procedures!
1. The Panda module has its own mixing function. Therefore the RC transmitter can be
programmed for a ―normal‖ layout aircraft.
2. Please choose the correct mixing mode in
―Mix control‖ to change the layout of the
aircraft. Following is a table describing the
possible layouts: