Vortech 2006-2010 6.1L Jeep SRT8 User Manual

Page 38

Advertising

P/N: 4CK020-010 v6.0, 02/17/2012

AI. Re-assemble the top lid to the canister, and

the lower bucket to the middle section of the

fuel pump canister being sure that the fuel fil-

ter pad is positioned appropriately. Make sure

that the o-ring is installed on the middle sec-

tion of the discharge and aligned properly with

the riser located in the bucket during reassem-

bly. Lubricate the o-ring with a drop of clean

motor oil to ensure the o-ring doesn't tear or

bind during re-assembly.

(See Fig. ao, Fig. ap)

Fig. ao

Fig. ap

NOTE: It is important to be sure that the o-ring is properly

seated and sealed during re-assembly of the bucket

as failure to do so may result in insufficient fuel pres-

sure at wide open throttle.

Advertising