Vortech 2006-2010 6.1L Jeep SRT8 - Manual (Page 40)

P/N: 4CK020-010 v6.0, 02/17/2012
©2012 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured 30
AN. While pressing down on the lid, re-install the
canister retaining ring using a brass or similar
non-sparking metal punch and hammer.
AO. Tap the retaining ring in a clockwise direction
until the raised notches are located with the
appropriate raised notch of each of the tanks
brackets. (See Fig. p, Fig. q)
AP. Squeeze a small amount of dielectric grease
into each pin location of the connector that con-
nects to the external receiver of the fuel pump
canister lid.
AQ. Connect the fuel feed line to the top of the pump
canister unit.
Fig. p
Fig. q