Xblue Networks X-25 - Manual (Page 100)

100
Operator Code
At default when you dial zero (0) you will ring extension 101 both day and night. To change this click, on
Operator Code and you can select the same or different Operators for day and night. In addition, if the defi ned
operator is busy on a call, you can device an alternate day and night operator. You may also defi ne how long
an extension will ring before the call is rerouted.
Paging Group
You may group extensions together that will receive a common page announcement when the telephone is idle
and within the same Subnet. There are three groups, the default dial codes are 401, 402 and 403. Each group
can have up to sixteen extensions and an extension can be in more than one group.
Start UCD Group Number
There are four Uniformed Call Distribution (UCD), or Hunt groups, each can have up to 16 telephones and
telephones can be in more than one Group. The default dial codes are 430, 431, 432 and 433. Each group can
be programmed to be all ring, so that all extensions, with in the group can ring simultaneously, Linear - which
rings the phones in the order that they are entered or Distributed - which rings the extension, within the group,
that has been on hook and idle the longest.
System Speed Bins
There are 100 system speed bins, default dial codes 600~699, which can be accessed by all authenticated
extensions. The extension will dial the three digit code and the stored number will automatically be dialed. A
.csv fi le can be used to import a list of numbers.
“Wireless Local Area Network (WLAN)”