Xblue Networks X-25 - Manual (Page 35)

35
Redial
Also known as Last Number Redial or Call Log, allows you to select previously dialed, received or missed
telephone numbers by selecting them from a list stored on the
X-2020 telephone.
Registration Server
The system is equipped to act like a registrar server for both telephone end points and SIP trunks, which
eliminates any possibility of a numbering confl ict.
Remote Management
The system combines both Proxy and Registrar servers in its application. For a Registrar server, it acts as
the front end to the location service for a domain, reading and writing mappings based on the contents of the
Register requests. The location service is then typically constructed by a proxy server.
Service Mode
There are three service modes; Day, Night and Time. When the system is in day mode, the day outgoing
message will play and the day class of service will be referenced when an extension dials a telephone number.
Night mode, the night outgoing message will play and the night class of service will be referenced when an
extension dials a number. If the system is set to time mode, it will automatically switch between day and night
modes and the associated classes of service for day and night.
SIP Trunk
The system can support up to 4 SIP uplink servers, known as SIP Trunks. These trunks, once authenticated,
are treated as any other telephone line in the system. Including the normal programming such as Call Routing,
Call Restriction, and Trunk Groups. In addition, the system may be provisioned for Direct Inward Dial (DID)
private numbers, which are only available over SIP Trunks. SIP Trunks are required when using the Call
Forking Call Forward feature with using an external telephone number.
Soft Interactive Keys
There are four buttons under the
X-2020 telephone display that change their function, to assist the use as
they use the telephone. For example, when the phone is idle, the left soft key shows “Menu”, which changes
when the speaker button is pressed, to show “NUM” and the third key shows “SPD”.
Speed dial
The
X-2020 telephone has a special location for your private use of frequently dialed numbers. Unlike the
phonebook, these numbers are stored by location number 0 - 9, not alphabetically, and can only be accessed
by you by pressing the down navigation key from an idle telephone.
Station Lock
Using an extension’s password, users can lock their telephones. This helps reduce unauthorized users from
using an extension that may have an unrestricted class of service. The use of station lock, may cause that
extension to be restricted from calling 911!
Station Message Detailed Recording (SMDR)
This feature is used to monitor and report on incoming and/or outgoing telephone line (PSTN or SIP Trunk)
calls and displays them chronologically by date. The SMDR information stores telephone line used, extension
number, time and date, and the length of each call. For further evaluation, you may copy this table and paste it
into Microsoft excel.
System Speed Dial
See Phonebook Public