Xblue Networks X-25 - Manual (Page 32)

32
Flexible Numbering Plan
The
X -25 is preprogrammed with a default numbering plan which you may customize. Some features show
“Start...”, which means that the number shown is the fi rst number of the sequence. For example, Start PSTN
Line Number 701, which is line 1, lines 2 - 4 will be 702, 703 and 704. When changing the numbering plan it is
important to remember that the numbers entered cannot confl ict with each other or the numbers entered in the
emergency call table, such as 911.
Description Default Numbers Confi gure
Start Extension Number 101
End Extension Number 125
FXS Phone Extension 125
Operator Speed-Dial Number 0 Day/Night Alternate Day/Night
AA/Voicemail Service Number 450 - additional 451 - 459
Start Virtual Extension Number 830 - additional 831 - 846
Start PSTN Line Number 701 - additional 702, 703, 704
Start SIP Trunk Number 711 - additional 712, 712, 714
Start Trunk Group Number 80 0 - additional 81, 82, 83
All Paging Number 400
All Paging Range LAN/WAN/Booth
Paging Group Start Number 401 (1) 401, (2) 402, (3) 403
UCD Group Start Number 430 (1) 430, (2) 431, (3) 432, (4) 433
System Speed Dial 600 600 through 699
Start Call Park Number 731 - additional 732, 733, 734
Conference Room 300
Hot Dial Keypad
The
X-2020 supports Hot Dial Keypad dialing, which allows you to dial a telephone number without lifting the
handset or pressing the speaker button. To speak privately, just lift the handset.
Last Number Redial
Last number redial, also known as Redial or Call Log, allows you to select previously dialed, received or
missed telephone numbers by selecting them from a list stored on the
X-2020 telephone. This will require an
entry in the Call Restriction Table, for your “Home Area Code”.
Least Cost Routing
See Call Routing
Line Group
Each telephone line in the
X -25 is assigned to one of four trunk groups, which are used to group similar trunks
together. For example, all PSTN lines in group 1 and SIP Trunks in group 2.
Live Call Record
Also known as One Touch Record, which allows extension users to record the current conversation. Live call
record is extremely helpful for remembering the telephone numbers or addresses when a pen and paper are
not readily available. The recording is placed in the user’s personal mailbox. This feature works with
X-2020
phones registered on both the LAN and the WAN.
Note: This feature may violate privacy laws if used in a manner that is inconsistent with
requirements of these laws. Manufacturer assumes no responsibility with regard to the use of this
feature. It is provided for virtue of ethical use only. The user is responsible for using this feature
appropriately considering all applicable laws.