Xblue Networks X-25 User Manual
Page 93
93
Trunk Group
The
X
-25 system has four trunk groups, each supports one or more telephone lines. Trunk groups are used to
group trunks that are used in similar ways, such as local and long distance calling. At default, all of the “PSTN”
lines are in group 1 and SIP lines are in group 2.
Select how outbound calls will be accessed when a user dials out. You can select between SIP or PSTN lines
fi rst or second, and then increasing or decreasing order. At default, Trunk Group Priority is set to PSTN fi rst,
increasing. This means that they system will place calls starting with line 1, if it is busy, line 2, etc. If set to
Decreasing the system will place calls starting with the last line in the system, then if that is busy, it goes to the
next to last, etc.
“Wireless Local Area Network (WLAN)”