Xblue Networks X-25 - Manual (Page 49)

49
Extension Feature Reset
This feature is a quick way to deactivate several features that have been changed from factory default.
Operation:
From the extension dial *69 + The extension’s voicemail password or the administrator password
The following will be set back to factory default:
• Call Waiting
• Paging Accept
• All programmed buttons are returned to default
• Phone Lock is disabled
• All programmed call forwarding is removed
• DND is disabled
• The Extension (Agent) is logged into all programmed groups
• Auto Answer is disabled
• All programmed distribution lists are deleted
Notes:
1. This is good when troubleshooting extension anomalies
Feature (Flexible) Button Programming
The four buttons on the
X-2020 can be reprogrammed to accommodate a telephone line or one of the system
features. At default all four buttons are programmed as telephone lines 1 ~ 4. All of these feature can be, and
may be easier to programmed using a standard Internet Web browser.
Operation:
From an Idle
X-2020 telephone dial *70 + BN + FT
1. BN = The button to be programmed; 01 - 04
2. FT = The numeric value of the of the feature code
• 00 = Blank Button
• 01 = Extension; can be a physical or virtual extension
• 02 = Telephone Line (PSTN or SIP)
• 03 = Call Park; you must enter the Park locations. Default are 731~734
• 04 = Feature key; you must enter the feature code. Such as *91 Agent Log in or 400 Page
• 05 = Others; such as a frequently dialed number. Just enter the number as it would be dialed.
• 06 = Do Not Disturb - There is no need to enter *4 or **4 they system does it automatically
• 07 = Live Record
• 08 = Virtual Extension; you must enter the extension number default is 830 - 846
Notes:
1. Most feature can be programmed on a button
2. Some features require one button to enable and another to disable a feature
3. Some features require a button to use.
Examples are on the next page: