Xblue Networks X-25 - Manual (Page 134)

Other important settings to change
Advanced Settings --> WAN
Enable Firewall
Wireless --> Basic --> Primary
Change the SSID – Do not use your company name – use a hobby like fl yfi shing and then click on Hide Ac-
cess Point so that it is not visible to everyone that is looking for Wireless connections.
Wireless --> Security -->
[the above entered SSID] name changes may take up to 5 minutes before appearing. Once it appears, select
the Network Security Type that you would like to use or if already in service, change the password.
Wireless --> MAC Filter
To further secure your wireless connection, enter the MAC address of each device that will be allowed to con-
nect to the Wireless Network. No other devices will be allowed to connect until their MAC address is entered.
Voice --> Voicemail --> General
Change the existing “Admin Password”, which at default is 000000 (6 Zeros) to a new 6-digit number between
000000 - 999999
Voice --> Voicemail --> General
Make sure that DISA is disabled
Voice --> Voicemail --> Phone Extension --> Confi guration
Click on Confi guration for each extension and enter a new 4-digit password for each voice mailbox.
Voice --> System --> SMDR
Confi gure SMDR – set it to Local and both and then click on save
[Continued]
134