Xblue Networks X-25 User Manual
Page 119
119
Access Control
The port, how or where a system can be accessed, specifi c IP address and changing passwords are all
parameters that are set in Access Control.
Service Port
At default the system uses commonly used ports for the Web, FTP, TFTP, Telnet and SSH parameters. Since
these are “Virtual” ports, you my use any number from 1 to 64,000. It is common to use easy to remember
numbers such as the year you were born or 1492 or 1620, etc. For security reasons, you will want to change
all fi ve ports, especially the “Web Port”!
Once you have changed the Web Port, you will need to access the system the following way:
http://xxx.xxx.xxx.xxx:yyyyy Where “xxx.xxx.xxx.xxx” is your system’s fi xed IP address, and yyyyy is the new
port number. For example, you may enter
http://74.75.221.120:1492
“Wireless Local Area Network (WLAN)”