Xblue Networks X-25 - Manual (Page 54)

54
Programming Parameters
There are eight major sections that make up the programming parameters of the
X -25 system. Two sections,
“Device Information”, which shows the current networks’ status and “Diagnostics”, which shows the status
of the WAN/LAN, Standard PSTN and SIP IP telephone lines, the automated attendant ports, and the FXS,
Analog (SLT) port, both are for information only.
The “+” in the menu folder indicates that there are parameters contained within the folder. When clicked on, the
parameters will expand.
Device Info Advanced Setup Wireless Voice Management
The
X -25 has a setup wizard, which walks you through the
setup of your new system. The system comes up working as a
wired and wireless router and telephone system, without any
programming, however, you may want to customize the settings
for you installation.
The Wizard goes through the WAN, LAN, Wireless and (NTP)
Time settings, all of which can be programmed in the Advanced
Setup and Wireless settings.